Best Router Tables

Best Router Table Reviews: Diy or Professional?

There are many opinions about which type of router table is better. Some say that they are both. However, there is no right answer because each person prefers one over another. There are pros and cons of each type of router table. You will have to decide if it suits your needs best.

The Pros and Cons of Each Type of Router Table

Router table is a great tool to use when building furniture. It helps you get the job done quickly and easily. If you want to build something with high quality, then you need a good router table. A router table is very useful for any kind of woodworking project. Whether it’s cutting out shapes or making intricate patterns, a proper router table can make your work much easier than without one.

However, there are some disadvantages to using a router table. One disadvantage is that you might not be able to do all the tasks at once. For example, if you’re working on carving a piece of wood into a chair leg, you’ll probably have to carve the bottom first before moving onto the top. This means that you won’t be able to finish carving until after your work on the other side is finished. If you had a router colume, on the other hand, you could finish carving both sides at once.

Another disadvantage is that you might not get the precision cuts and shapes that you want. Many find that it’s difficult to maneuver larger pieces of wood when using a table. Also, maneuvering smaller pieces can be difficult too. Using clamps can make this easier, but it’s still a hassle.

On the other hand, router columns have their own drawbacks. The biggest one is safety. A router table is much safer to use than a column because you clamp the wood into place. You don’t have to worry about the wood shifting and causing an accident while you’re routing it. With a column, however, there is always a risk of something going wrong.

What About the Quality?

Another thing to consider is the quality of each type of router table. Many people find that professional shops typically use router tables rather than columns. This is because it’s easier to make precise cuts with them.

Router tables are also used more frequently in professional woodworking shops. This is because many people prefer the usability and safety that these tables provide. If you’re looking for the best quality router table for your money, then you might want to go with a table rather than a column.

Things to Consider When Buying a Router Table

Best Router Tables - PurchMarketplace

When it comes time to buy one of these tables, there are a few factors that you have to keep in mind. If you don’t, you could end up with one that doesn’t fit your needs at all. So here are some things to think about before buying a router table.


Portability is a big factor to consider when buying a router table. If you only intend on using it at one location, then portability isn’t as much of a concern. However, if you’re like most people and use it at different locations, then portability becomes more important.

Essentially, the more a router table can do the more it weighes. For example, a fixed base router table is very sturdy and convenient to use. However, it’s pretty much immobile once you set it up. On the other hand, a plunge router table is much lighter and easier to carry around from place to place.


The size of the router table is also something you’ll want to consider. If you’re working on larger projects, then you might want to get a bigger table. This will give you more room to work with. However, if your projects are on the smaller side, then a smaller table will do.


As was mentioned before, the larger a router table is the heavier it’ll be. So you’ll want to think about how much effort will be required for you to transport the router table. If you think portability will be an issue, then you should take that into consideration. Otherwise, it might be best to buy a lighter one.

Alignment Tools

Best Router Tables - Best Purch Marketplace

Not all router tables come with the same type of alignment tools. Some are equipped with pin and ring mechanisms to assist you when centering your bits. Others have digital readouts that help you line up your bits. If you think these features are important, then you’ll want to make sure your router table has them.

Dust Collection

A lot of router tables don’t come with dust collection attachments. If you intend on doing lots of woodworking, then you’re going to need one with good dust collection. Otherwise, the amount of sawdust caused by your project is going to make a huge mess. So if you want a clean working environment, then this feature is important.

How to Set Up a Router Table

Assembling a router table isn’t all that difficult. However, if you haven’t ever put together anything like this before then you should pay attention to the instructions.

When you first get your router table, there will be several boxes containing all the parts you need. You should lay every piece out on the floor or some other flat surface. This way you can see if any of the parts are missing. If anything is missing, then you’ll need to contact the manufacturer.

After laying out all the parts, you’ll then want to begin assembling them together. The instruction manual will provide you with a list of everything you need before you begin this process. Make sure to have a Phillips head screwdriver on hand. You might also find it useful to get a rubber mallet to drive in some of the plastic pins.

After all the parts are together, you should check to see if there are any missing parts. If everything looks good, then you can move on to the next step. You should also apply a coat of wax to the table before using it. This helps to prevent any friction that may cause heat and possibly cause a fire.

Once your router table is assembled, you’re ready to begin using it.

Using A Router Table

Best Router Tables - PurchMarketplace

Now that your brand new router table is all set up, it’s time to learn how to use it. Using a router table is different than using a fixed router base.

First, you’ll want to adjust the height of the table so that the bit is slightly above the surface. This will ensure a smoother cutting motion when working. You can then lock this setting in place by turning the lock knob at the top of the column.

Second, you’ll want to adjust the fence so that it’s as close as you can get it to the edge of the bit. If you’ve purchased a router table with a pin and ring mechanism, then you can do this by turning the rings to align the pin with the hole. If not, then you’ll need to make sure the holes in the fence are aligned with the ones on the columns. You can then lock this in place by turning the lock knob. If there is a smaller lock knob at the base, you’ll want to turn this one as well.

This will prevent the fence from moving from side to side.

Third, you should make sure that everything is properly grounded. The easiest way to do this is by turning on your router and then touching the blue terminal on your router table. Once they’re connected, you should feel a tingling feeling in your hand. If this happens, then the devices are properly grounded. You should never work on a router table that isn’t properly grounded.

After the table is set up, you can begin working on your project. First, you should place your wood against the fence and then slowly lower the bit into the wood until it just begins to cut into it. At this point, you can slowly move the router from left to right to make a groove in your piece. You can then use a piece of wood as a hammer to carefully begin removing material from the middle of the groove outward.

As you become more experienced with using a router table, you can work faster and faster. You can even get creative in the types of grooves and designs you put into your work. Now that you how to use a router table, you’re ready to tackle even harder projects.

Want to learn more about using a router?

Then read our Router Tips guide.

Sources & references used in this article:

O (log n) dynamic router-tables for prefixes and ranges by H Lu, S Sahni – IEEE transactions on computers, 2004 –

Efficient construction of pipelined multibit-trie router-tables by KS Kim, S Sahni – IEEE Transactions on Computers, 2006 –

Plunge fence for shapers and router tables by JR Blichmann – US Patent 5,908,061, 1999 – Google Patents

O (log n) dynamic router tables for prefixes and ranges by SK Sahni, H Lu – US Patent 7,523,218, 2009 – Google Patents

(log n) dynamic router-tables for ranges by H Lu, S Sahni – Proceedings of the Eighth IEEE Symposium on …, 2003 –

Conflict detection in internet router tables by C Kupich, KA Mohamed – Institut für …, 2006 –

Prefix and interval-partitioned dynamic IP router-tables by H Lu, KS Kim, S Sahni – IEEE Transactions on Computers, 2005 –

Dynamic IP router tables using highest-priority matching by SK Sahni, H Lu – US Patent 7,509,300, 2009 – Google Patents

Multiprefix trie: A new data structure for designing dynamic router-tables by SY Hsieh, YL Huang, YC Yang – IEEE Transactions on …, 2010 –