Best Plunger For Tub:
The most common problem with a bathroom is a leaky toilet. A leaky toilet means that water leaks out from the bottom of your bathtub or shower drain when it rains. When you flush the toilet, some of the liquid that comes out may cause damage to your plumbing system which will require repairs later.
If you have been having problems with leaking toilets, then you need to buy a plunger to fix them!
There are many types of plungers available. You can choose between a plunger made of plastic, metal, stainless steel, or even silicone. Some plungers come with a special design to make sure that they don’t get stuck in the pipes while you’re using them.
Other plungers are designed so that you can use them without any hassle at all.
Plunge type determines how much force you need to apply to stop the flow of water. There are two main types of plungers:
1) Plastic Pumps: These plungers work by pushing down on the water inside the pipe.
They usually cost less than other kinds of plungers because they aren’t very heavy and they don’t require too much effort to operate. However, they also have a tendency to get stuck inside the drain if not used properly.
2) Stacked Plungers: These plungers work by putting a heavy object on top of the drain opening to stop the flow of water.
They are always made of metal or hard rubber and are heavier than other kinds of plungers. As a result, they can apply more pressure than other types of plungers, but they require more effort to use as well.
While searching for the perfect plunger you will also need to consider the diameter of the plunger’s head. A small diameter plunger head can easily get stuck inside a narrow drain, while a large diameter plunger may not fit inside a smaller drain opening. Make sure to buy a plunger with an appropriate diameter for your needs.
The last thing you need to consider when choosing a plunger is its handle. Some plungers come with long, heavy handles for more leverage, while other models have shorter, lighter handles. Longer handles are helpful if you need to put extra force into your push, but they can be cumbersome and tiring to use after awhile.
Best Plunger For Elongated Toilet:
Are you having issues with your elongated toilet?
Well, you should buy a plunger to unclog it! There are many plungers available, so it can be a bit overwhelming to choose the right one. You will need to buy a plunger with an appropriate diameter for your toilet, so it will fit inside the bowl. It is also important that the plunger does not slip off of the toilet seat when you push down on it, so choose a heavy duty plunger with a wide base.
Best Plunger For Shallow Sink:
If your sink is shallower than normal, then you will need to buy a plunger that is made for shallow sinks. These plungers have special designs that let them fit into smaller openings. They also come in different sizes so you can find one that fits your sink perfectly.
Make sure to buy a heavy duty model so it does not break while you are using it.
Best Plunger For Bathtub:
Do you need to clear your clogged bathtub?
You will need to buy a heavy duty plunger that is made for bathtubs so it will fit inside your drain. It is important that the rubber cup is large enough to form a seal over your drain so it can create enough pressure to unclog it. Some plungers also come with long handles for more leverage, so you can apply more pressure to the drain. Make sure to choose a heavy duty plunger that is made of hard rubber so it will not break while you are using it.
How To Use A Plunger:
Using a plunger is fairly simple and easy to do, just make sure to follow these steps:
1) The first thing you want to do is make sure that the area around your drain is clean.
This will help prevent clogging in the future. “
What do you mean by clean?”
you might ask. This means that there shouldn’t be any dirt or grease near the drain. If there is, then you need to clean it up before going any further.
2) Next you will want to make sure that the plunger cup fits properly over your drain opening.
This may seem obvious, but some plungers are designed for different size drain openings, so you will definitely need to check this first! If your plunger doesn’t fit properly over the drain then it is not the right type of plunger for your drain.
3) Now it’s time to start pushing!
All you need to do is firmly push and pull the plunger up and down over the drain opening as shown in the diagram below:
4) Once you have pushed down on the plunger, you should slowly begin to see the water level in your sink begin to go down.
If the water level does not go down at first, then you will need to apply more pressure until it starts going down. Some clogs may require more effort than others, but as long as you are using a heavy duty model, it should not break.
5) Once the water level has finally gone down, you can now clean up the mess and be careful not to let it clog again in the future!
Here are some helpful tips to make your life easier:
1) If you have a slow drain that doesn’t seem to be clearing with repeated plunging, there is a good chance that wire clogs may be to blame.
To fix this, you will need to purchase a trap auger, also known as a drain snake. These can be purchased at your local hardware store and can easily remove even the toughest of clogs.
2) Do not use a plunger if your drain has been partially blocked by solid waste.
It may seem logical that plunging a solid block of waste down the drain would help remove it, but in reality this can cause the waste to become stuck further down the pipe and make the problem worse. If you have a clog caused by solid waste you will need to contact a plumber.
3) Do not use chemical drain cleaners.
These types of drain openers can damage the rubber inside your plunger and also severely damage your pipes. If you think you need a chemical drain opener then it’s best if you contact a plumber.
4) If you have a clogged shower drain you may be able to use a shower plunger, but only if the drain cover can be easily removed.
If the drain cover cannot be easily removed, you will need to contact a plumber.
Hopefully these tips and tricks will help you out next time you have a clogged drain! But even with the best of care, sometimes clogs are inevitable. If this is the case for you, make sure to contact a professional plumber.
They will know what to do when most plungers fail.
Do you have any tips and tricks you can share?
Let me know in the comment section below!
Sources & references used in this article:
Syringes, syringe plungers and injector systems by EJ Rhinehart, DM Reilly, MW Hitchins… – US Patent …, 1999 – Google Patents
Low inductance contact probe with conductively coupled plungers by JR Sochor – US Patent 8,373,430, 2013 – Google Patents
Syringe and syringe plungers for use with medical injectors by KP Cowan, JA Haury, JE Neff – US Patent 7,666,169, 2010 – Google Patents
Pill dispenser employing a sealed pill carrier and integrated dispensing plungers by DC George, DT Upton – US Patent 6,155,454, 2000 – Google Patents
Populists, Plungers, and Progressives: A Social History of Stock and Commodity Speculation, 1868-1932 by CB Cowing – 2015 – books.google.com
Syringes and plungers for use therein by SJ Dedola, MW Hitchins – US Patent 6,224,577, 2001 – Google Patents