Best Combination Square
The best combination square is one which contains all the elements needed to make a good shape. There are many factors that determine the quality of a combination square. These include:
the size of the pieces;
the number of sides;
the thickness and type of paper used;
how it was cut; and finally, how it’s glued together.
A good combination square will have all these characteristics. However, there are some combinations that are better than others. For example, a combination with fewer sides may not provide enough support for your design if you’re using different types of wood or other materials.
A combination with more sides might be too difficult to glue together properly if you use different kinds of glues.
There are also certain designs where it would be easier to buy a cheap one and then modify it later. For instance, a box with one side cut out would be easy to create from scratch and will save you money and the hassle of gluing together a more complex combination.
The square set is made up of straight edges where each edge is 90º. The size of the square can range from a simple 1×1 all the way to a large 12×12. There are also specialized ones that have two 90º corners and one 45º.
This is called an L-square.
The length of the straight edges vary from 2 inches all the way up to 32 inches. This is important if you need to measure and cut larger boards. In fact, it would be difficult to cut any board larger than 4 feet using a regular 4 foot combination square.
The combination sets with more edges will be heavier and have a higher chance of warping over time. They also cost considerably more than the simple and smaller ones. So, you have to decide how much you need it and what you’re going to be using it for.
For the most part a simple 6-inch will do 90% of the jobs you might have. You really don’t need anything larger than that unless you will be cutting larger boards on a regular basis. The larger ones might be better if you work with MDF or other synthetic boards on a regular basis.
Furthermore, the type of material that the square is made out of can also vary. The standard is hardboard which is similar to particle board but more dense. They will never break but they can be dented if you drop them from a great height.
They can also be scratched if you’re not careful. Harder and denser versions are more durable but are also more expensive.
Plastic or Nylon squares are generally less expensive and lighter in weight. However, they can also be dented or even shattered if you’re not careful with them. In some cases, the edges can even become chipped.
There are also combination squares that are made from metal or aluminum. These will be more expensive but they’re also more durable than the plastic and hardboard ones. The edges won’t be able to dent or shatter like with the other varieties.
They do tend to be a lot heavier though so keep that in mind.
Metal squares will require more maintenance than the others. Any metal can be susceptible to rust if not properly cared for so you’ll have to keep it oiled or clean it after use. Don’t leave it out in the rain or set it near a source of water.
Some of the best types are made from fiberglass. These are very durable and won’t break or chip like their wooden counterparts. The only issue you might have is with the edges becoming dull over time.
You can always take a fine-grade sandpaper to them to remove the blunted edge.
You should also make sure that you have a set of common tools and measuring devices. This will make the job easier for you if you already have these on hand. You should always keep your tape measure in good condition by changing the batteries when needed and replacing the blade when it gets too short or damaged.
The only other thing you might need is a speed square. This is used for marking straight lines across large pieces of material that a tape measure can’t otherwise reach. You simply set the proper distance you need, lock it down and draw your line.
Best Choice Products® 12-Inch Steel Yardstick
This choice here is great for when you just need something simple and cheap. It’s a good all-purpose choice that will be suitable for most jobs. The stick is made from tempered steel so it will be able to handle most of what you throw at it.
The edges are rounded so they won’t bite into your hands as much and cause hand fatigue. The only major issue with this product is that the finish can begin to wear off after awhile. You’ll need to be careful not to get it wet since water can damage the metal and cause it to rust.
Tempered steel material
Rounded edges for user comfort
Not the most durable
Can’t get wet or it will rust
Finishing can wear off over time
You don’t really need to spend a fortune on this product since the more expensive ones don’t offer that much more anyway. This will suit your needs just fine and it’s very affordable.
Stanley 60-120 12-inch Steel Tape Rule
This product is meant to be a bit more heavy duty than the last one since it’s made from hardened steel. It has the same rounded edges for user comfort but it shouldn’t show signs of wear and tear as easily.
The only issue you might have is that this one can be a bit more painful on the hands since it doesn’t have the same softening of the edges. However, it’s accurate and very durable so it’s worth the minor discomfort in some users’ opinions.
Hardened steel material
Rounded edges for user comfort
More painful on the hands than other choices
This choice is more expensive than the last one but that’s mainly because of the material used to make it. It’s more resilient than the other types so you won’t have to worry about it wearing out anytime soon.
Stanley 100-010 10-foot Fiberglass Tape Measure
This product is made from fiberglass so it’s very strong and able to stand up to most jobs. The edges are rounded for more comfort and the whole thing is easy to hold onto. It locks into place every 9 inches so you can keep track of measurements without having to use a calculator or your own memory.
It also comes with a clip so you can easily secure it to your pocket or apron. There aren’t many issues with this product beyond the simple fact that it isn’t as durable as some of the other choices. For most people, though, this won’t really be an issue.
Rounded edges for comfort
Locks at 9 inches for convenience
Comes with a clip so you can secure to your pocket or apron
Not as durable as some other choices
The Verdict – Best Tape Measure
Out of all the choices, the best tape measure has to be the 12-Inch Steel Yardstick. It has everything you need from a tape measure and more at an affordable price. It’s also made from tempered steel so it will be able to stand up to most jobs you throw at it.
Yardsticks in General
A yardstick is a measuring device that has the standard measurements for both inches and centimeters marked off every 2.5 centimeters. Many of these come with both sets of measurements so that you’ll be able to use it no matter where you are in the world.
These are typically made from either wood or metal and can also measure distances beyond the 5 feet that a tape measure is typically capable of measuring.
Whether you’re in the construction industry, a mechanic, an artist, or you just have kids in the home that need assembling toys, you’re bound to need one of these at some point. These are surprisingly multipurpose tools so it’s definitely worthwhile having one around the home.
How Do You Use a Yardstick?
The first thing to remember when using a yardstick is that not all of them are created equally. If you happen to get one that’s smaller than the standard measurements, then you might find that some of the markings aren’t consistent. Always check first to see what type of yardstick you have so you know exactly what to expect in terms of accuracy.
Once you know what to expect, using a yardstick is fairly easy. All you need to do is hold it firmly in one hand and steady the other end on a firm surface such as a wall or table. From there, you can place it against an item that you want to measure and make a note of the measurement.
What is the Best Yardstick?
The best yardstick is the one that meets your needs. If you need a measuring stick that’s easy to carry around with you, then a metal one might be a good choice since they’re relatively compact. If you’re going to be using the yardstick only at home, then a wooden one would probably be better since they don’t require any sort of extra maintenance.
You’ll also want to decide whether you want imperial or metric measurements marked on the stick. This will depend on where you are and what you’re used to using. In the United States, the standard is imperial, but in other places, it’s metric.
Most yardsticks have both types of markings but it’s important to check before you make a purchase since you don’t want to get one that only has one system of measurement marked on it.
How Do You Take Care of a Yardstick?
Yardsticks aren’t incredibly hard to take care of, but they do require some care. The first thing you’ll need to do is make sure that you don’t leave it in the sun or some other hot area. This could cause the wood to warp and change the measurements. Sunlight can also bleach the color out of lighter colored wood, so if you have a darker one, this won’t be much of an issue.
It’s also important to make sure that it stays dry since even slightly damp wood can cause issues. Make sure it isn’t in a place where water could potentially drip on it or else you may see some warping over time.
Over time, the markings on your yardstick will fade, especially if they’re painted on. You can try to refresh the markings by rubbing the stick with some steel wool to smooth out the surface before reapplying the markings with a paint pen.
Yardsticks are incredibly easy to find and relatively cheap. They’re a great tool to have around the home for doing measuring that’s a little more specific than just using your eyes. Make sure you keep your yardstick in good shape and you should be able to use it for quite some time.
Sources & references used in this article:
Best least-squares representation of signals by exponentials by R McDonough, W Huggins – IEEE Transactions on Automatic …, 1968 – ieeexplore.ieee.org
Variable selection in near infrared spectroscopy based on significance testing in partial least squares regression by F Westad, H Martens – Journal of Near Infrared Spectroscopy, 2000 – osapublishing.org
The method of least squares by SJ Miller – Mathematics Department Brown University, 2006 – williams.edu
Reflectance measurement of canopy biomass and nitrogen status in wheat crops using normalized difference vegetation indices and partial least squares regression by PM Hansen, JK Schjoerring – Remote sensing of environment, 2003 – Elsevier
Least squares and best unbiased estimates by TW Anderson – The Annals of Mathematical Statistics, 1962 – JSTOR
Comparison of ridge regression, partial least-squares, pairwise correlation, forward-and best subset selection methods for prediction of retention indices for aliphatic … by O Farkas, K Héberger – Journal of chemical information and …, 2005 – ACS Publications
On canonical forms, non-negative covariance matrices and best and simple least squares linear estimators in linear models by G Zyskind – The Annals of Mathematical Statistics, 1967 – projecteuclid.org
Robust linear least squares regression by JY Audibert, O Catoni – The Annals of Statistics, 2011 – projecteuclid.org
3D-QSAR study of insecticidal neonicotinoid compounds based on 3-way partial least squares model by K Hasegawa, M Arakawa, K Funatsu – Chemometrics and Intelligent …, 1999 – Elsevier