Best Augers

Best Gas Auger Reviews:

Gas augers are used to increase the flow rate of your gas line. They are generally made from steel or aluminum and have various sizes available. Some gas augers come with a hose connection while others require you to purchase one separately. You will need two things when buying a gas auger: A pressure gauge and a flexible hose.

The most common types of gas augers include the following:

1) Post Hole Auger – These are designed to extend the length of your gas line.

They can be installed at any point along your natural gas pipeline. Some post holes allow you to install them directly above ground, while others must be connected to a wellhead (a pipe that extends into the earth). Other types require drilling through rock before reaching the desired location.

2) Stihl Auger – These are similar to the post hole auger except they are manufactured using a metal spring instead of a solid rod.

Most stihls come with a threaded connector so you can connect it to your existing gas line. If you don’t already own one, then you’ll probably want to buy one separately since some models do not work with other types of gas lines.

3) Earthquake Auger – These are designed for drilling through rock.

Best Augers - Best Purch Marketplace

While they can be used to connect to an existing gas line, they are not always compatible with all models. To be safe, you should use a pressure gauge when installing your gas line.

4) Southland Auger – Manufactured by Southland Products, this type of gas auger is specifically designed for connecting to their wellheads.

It can be installed above or below ground, but most people prefer to drill it directly through the earth.

5) Post Hole Auger Rental – These are available at most tool rental shops.

If you rent one, you will need to have a pressure gauge on your gas line prior to drilling. This protects the equipment from damage and is much safer for the environment.

Most authorities recommend installing a gas gauge on all gas lines that extend more than 1,000 feet in length. However, some people prefer to drill their own holes without the help of a gas company. If you want to do this, then you should use a stihl auger to drill through the rock. This type of gas auger is designed for drilling through solid material like clay and rock. You can also use a gas post hole auger for this task, but the process will take much longer.

You can easily find the correct gas auger to help you drill through the ground by searching online or visiting your local hardware store. If you need any additional information, then you should contact a professional, such as one from Robert’s Tool Service.

In today’s world of rising energy costs, drilling a natural gas line to your home is both convenient and cost effective. You can easily find all of the tools you need online or at your local hardware store. Installing a gas line is generally safe and easy to do, provided you use the proper tools and safety gear.

Gas line installation requires the drilling of several holes in the ground or through rock (depending on your location). While this process can be time-consuming and messy, it is necessary to provide a gas source for future appliances. Installing a gas line does require some specialized equipment, but these tools are relatively inexpensive and easy to find online or at your local hardware store.

Best Augers - Purch Marketplace Website

In addition to installing the gas line itself, you may also need to drill holes in your walls for pipes and valves. Most appliances require a gas valve in order to function properly. Valves can simply be screwed into a wall, but you may need to drill holes and mount them separately.

After you have purchased all of the necessary tools, you can begin installing your gas line by identifying a location for the main valve. Valves usually need to be close to the center of the house. most people prefer to install them in a garage or utility room. You can then drill the holes for your gas line. These will be used to feed the gas from the valve to different appliances throughout your home.

One important step in installing a gas line is accurately measuring the necessary distance between each hole. Measuring tools are relatively cheap and easy to find. You should measure the distance between each hole so that the pipe fits tightly and securely.

After you have measured the necessary distance, you can begin drilling holes for the pipes. Most drilling equipment comes with a bit already attached. If not, you will need to purchase an auger bit for your drill. You can find more information about auger bits online or at your local hardware store.

When you begin drilling, you should wear protective gear to prevent the risk of injury. Eye protection, ear protection, and gloves should be worn to prevent serious injury in the case of an accident. Wearing a mask or respirator will also prevent inhaling any dust or debris created from drilling. When drilling into rock, you should first add water to the bit to help prevent it from overheating.

After drilling all of your holes, you can feed your gas line through. This process is relatively easy. When you have finished feeding your line, you can connect each appliance using flare fittings and a torch. If you need to drill holes to mount valves or other components, you should do this before connecting any appliances.

After installing the valve and all necessary appliances, you can turn on your gas by opening the main valve. This should cause a “whooshing” sound as the gas enters your home. Once the hissing sound has stopped, you can light your pilot lights and try out all of your appliances. If the appliances are working correctly, you can turn off the main gas valve and your installation is finished.

If at any point you experience trouble with your gas line installation, please consult a professional. There are many skilled technicians who can help you with any problems. If you are still experiencing problems then you may need to call a professional.

If you are a skilled technician, then please consider helping those in your area by volunteering for a local community event or donating to the Red Cross.

Gas leak! Something has happened.

Before you do anything, you need to turn off the gas main and exit the building immediately. A small leak can become a massive explosion if enough gas has accumulated. If there is evidence of a potential explosion, call your local emergency services immediately. Do not attempt to turn the gas back on or adjust any valves until a professional has inspected the area.


If a professional does not detect any gas leaks and fixes the problem, you can turn your gas back on and try again.

Congratulations! You have safely installed your gas line.

Sources & references used in this article:

Improvement in augers for boring rock by US Patent 176,505, 1876 – Google Patents

Performance of grain augers by AAL Prices – 2013 – Feb

Snow blower augers and impellers by AW Roberts, AH Willis – Proceedings of the Institution of …, 1962 –

Shank and socket connection for augers by LR Maxfield, DH Verhoff, DR Church – US Patent 5,209,003, 1993 – Google Patents

Internal tank augers for air seeder hoppers by HL Weikart – US Patent 2,588,901, 1952 – Google Patents

Internal tank augers for air seeder hoppers by R Memory – US Patent App. 10/923,493, 2005 – Google Patents

Internal tank augers for air seeder hoppers by RJ Memory – US Patent 6,854,405, 2005 – Google Patents